Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Yokogawa 2433-11: (1 year) CAL VER /5520
DATE:                  15-Sep-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.1 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       7
NUMBER OF LINES:       89
CONFIGURATION:         Fluke 5520A
STANDARD:              Fluke 5500A/COIL
=============================================================================
#
# Source:
#   YOKOGAWA Bulletin 2433-E
#
# Compatibility:
#   5500/CAL 5.0 or MET/CAL 5.0 or later.
#
# Subprocedures:
#   None
#
# Required Files:
#   NONE
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5520A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  DISP         Procedure not formally tested with UUT.
  1.001  DISP         See procedure README file.
  1.002  STD          Fluke 5500A/COIL
  1.003  ASK-   R                    P                            F        V
  1.004  ASK+           K                              X
  1.005  HEAD         PRELIMINARY INSTRUCTIONS
  1.006  DISP         Warm-up time: NONE
  1.006  DISP         Temperature : 18 - 28 degC
  1.006  DISP         Humidity: <80%
  1.007  DISP         [32]                WARNING
  1.007  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.007  DISP         of this calibration.  DEATH ON CONTACT may result if
  1.007  DISP         personnel fail to observe safety precautions.
  1.008  HEAD         {AC VOLTAGE}
  1.009  DISP         Connect 5520A to the UUT as follows:
  1.009  DISP         [32] 5520A NORMAL HI to UUT P2
  1.009  DISP         [32] 5520A NORMAL LO to UUT P1
  1.010  DISP         Set the rotary switch to Vrms.
  1.011  HEAD         AC VOLTAGE: {200V Range}
  1.012  5520   200   200.0V         1% 0.5/       60H            SI       2W
  2.001  HEAD         AC VOLTAGE: {600V Range}
  2.002  5520   600   600.0V         1% 0.5/       60H            SI       2W
  3.001  HEAD         {AC CURRENT}
  3.002  DISP         Connect a piece of heavy gauge copper from the 5520A 20A
  3.002  DISP         to AUX LO terminal and clamp the UUT around the wire.
  3.003  DISP         Set the rotary switch to Arms.
  3.004  HEAD         AC CURRENT: {20A Range}
  3.005  5520   20    20.00A         1% 0.5/       60H            SI HC    2W
  4.001  HEAD         AC CURRENT: {200A Range}
  4.002  DISP         Connect the 5500A/COIL to the 5520A 20A and AUX LO
  4.002  DISP         terminals and clamp the UUT around the coil.
  4.003  5520   200   200.00A        1% 0.5/       60H            SI HC    T5
  5.001  DISP         Remove the clamp and disconnect the wire from the 5520A.
  5.002  HEAD         {AC POWER}
  5.003  DISP         Connect the 5500A/COIL to the 5520A AUX HI and LO
  5.003  DISP         terminals and clamp the UUT around the coil.
  5.004  DISP         Set the rotary switch to kW.
  5.005  HEAD         AC POWER: {20kW Range}
  5.006  M5520        100V                                        SI
  5.007  5520         100A                         60H            SI    S  T5
# Need 5520A + 5500A/COIL accuracy here.
  5.008  ACC          10.00kW        TOL
  5.009  MEMI         Enter the UUT Power reading (in kilowatts).
  5.010  MEME
  5.011  MEMC   20    kW             2% 1/
  6.001  HEAD         AC POWER: {200kW Range}
  6.002  DISP         Connect the 5500A/COIL to the 5520A 20A and AUX LO
  6.002  DISP         terminals and clamp the UUT around the coil.
  6.003  M5520        500V                                        SI
  6.004  5520         200A                         60H            SI HC S  T5
# Need 5520A + 5500A/COIL accuracy here.
  6.005  ACC          100.0kW        TOL
  6.006  MEMI         Enter the UUT Power reading (in kilowatts).
  6.007  MEME
  6.008  MEMC   200   kW             2% 1/
  7.001  END